VERSION: 3.8.4 版本是正常的，LOG 如下：
root@keystone-evm:/# mpmcl run dsp0
[ 54.228164] remoteproc0: powering up 2620040.dsp0
[ 54.232960] remoteproc0: Booting unspecified firmware
[ 54.239915] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 54.245429] remoteproc0: registered virtio0 (type 7)
[ 54.250508] remoteproc0: remote processor 2620040.dsp0 is now up
[ 54.256619] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x3d
[ 54.263766] rpmsg_proto rpmsg0: inserting rpmsg src: 1024, dst: 61 run succeded
VERSION: 3.10.72
1） 用原版本运行 MPMCL RESET DSP0 出错
2） 修改 dts的dsp配置与3.8.4一样后，mpmcl reset ,load 都正常，但是mpmcl run dsp0 是
LOG 如下： rpmsg-proto 没有收到信息，请问谁知道哪里需要修改？谢谢！
root@keystone-evm:/# mpmcl run dsp0
[ 4750.243140] remoteproc0: powering up 2620040.dsp0
[ 4750.259499] virtio_rpmsg_bus virtio0: rpmsg host is online run succeded
[ 4750.259524] remoteproc0: registered virtio0 (type 7)